BMSJP - SILICONE ALKYD ENAMEL
- MSDS: BMSJP
- Manufacturer: RANDOLPH PRODUCTS CO
- Product Name: SILICONE ALKYD ENAMEL
- National Stock Number: 8010-00-145-0164
Product Identification
Product ID:SILICONE ALKYD ENAMEL
MSDS Date:06/01/1990
FSC:8010
NIIN:00-145-0164
MSDS Number: BMSJP
Responsible Party
CARLSTADT, NJ 07072
US
Emergency Phone: 201-438-3700
Info Phone: 201-438-3700
Cage: 77672
Contractor
Telephone: 201-438-3700
Cage: 77672
Ingredients
XYLENE (SARA 313) (VP- 25 @ 20 C)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5-15%
ACGIH TLV: 100 PPM;150 PPM STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
MINERAL SPIRITS (VP- 10 @ 20 C)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 20-30%
ACGIH TLV: 200 PPM
COBALT NAPHTHENATE (SARA 313) (VP- 10 @ 20 C)
CAS: 61789-51-3
RTECS: QK8925000
Fraction By Weight: UNDER 1%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE- SOLVENT VAPORS MAY CAUSE
DROWSINESS, HEADACHE, DIZZINESS AND IRRITATION OF EYES, NOSE AND
THROAT. CHRONIC- EYES-IRRITATION, BLURRED VISION, TEARING.
SKIN-IRRITATION, DEFATTING, DERMATITIS. BREA THING-DIZZINESS,
WEAKNESS, NAUSEA, HEADACHE. SWALLOWING-GASTROINTESTINAL IRRITATION,
NAUSEA, VOMITING, DIARRHEA.
First Aid
First Aid:REMOVE TO FRESH AIR. FLUSH EYES WITH LOTS OF WATER. CONSULT
PHYSICIAN.
Fire Fighting
Flash Point Method:SCC
Flash Point:80.0F,26.7C
Lower Limits:0.9
Extinguishing Media:SAND, FOAM, CARBON DIOXIDE, CHEMICAL TYPES.
Fire Fighting Procedures:PREVENT FIRES, KEEP AWAY FROM HEAT, SPARKS AND
OPEN FLAME.
Unusual Fire/Explosion Hazard:AVOID BREATHING VAPOR OR FUMES. USE AIR
SUPPLIED RESCUE EQUIPMENT FOR ENCLOSED AREAS. COOL EXPOSED
CONTAINERS WITH WATER TO PREVENT EXPLOSION DUE TO PRESSURE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. WEAR APPROVED
RESPIRATOR. CONTAIN SPILL WITH INERT ABSORBENT (SAND, DIRT). PUT
MIXTURE IN CONTAINER OR DISPOSE. KEEP SPILL OUT OF SEWERS AND OPEN
BODIES OF WATER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT AND FLAME. KEEP
AWAY FROM CHILDREN.
Other Precautions:GROUND CONTAINERS AND EQUIPMENT. EMPTY CONTAINERS ARE
HAZARDOUS, DO NOT CUT OR WELD.
Exposure Controls
Respiratory Protection:WEAR MSHA/NIOSH APPROVED RESPIRATOR WHERE VAPOR
CONCENTRATIONS ARE ENCOUNTERED.
Ventilation:EXPLOSION-PROOF VENTILATION AT POINT OF CONTAMINANT
RELEASE.
Protective Gloves:NEOPRENE.
Eye Protection:GOGGLES.
Other Protective Equipment:COVERALLS AND BOOTS.
Supplemental Safety and Health
ADDITIONAL INFORMATION ON FILE.
Chemical Properties
Boiling Pt:B.P. Text:230 TO 284F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:45
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH OXIDANTS.
Stability Condition to Avoid:FLAMES OR HIGH HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE MAY FORM WHEN BURNED.
Conditions to Avoid Polymerization:FLAMES OR HIGH HEAT.
Disposal
Waste Disposal Methods:ACCORDING TO CURRENT LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.